PENGARUH PENAMBAHAN BEARING CAMSHAFT TERHADAP PERFORMA MESIN PADA MOTOR BENSIN 4 LANGKAH 150 CC

Muhammad Arsad Al Banjari

Abstract


Abstract: This study aims to determine the effect of modification camshaft with addition needle roller bearing on the left and right side. After that compare the engine performance with the standard camshaft on the motorbike Suzuki Satria F150. The method used is an experiment. The test is carried out on the dyno test by paying attention to the value of engine speed, engine power, and the highest torque produced without limiting the gas valve opening. The results showed that after modification with the addition of a needle roller bearing the highest engine power was 18.70 HP and 12.23 N.m of torque at an engine speed of 10,888 RPM. With the addition of a needle roller bearing to the camshaft, the engine power was increased by 2.08 HP and the torque value was increased to 2 N.m

 

Keywords: camshaft, needle roller bearing, engine performance


Full Text:

Pdf

References


Daryanto. 2013. Teknik Merawat Automobil Lengkap. Bandung: Yrama Widya.

Destrio Estu Wijanata, dkk. 2014. Pengaruh Variasi Lobe Separation Angle (LSA) Pada Camshaft Terhadap Unjuk Kerja Mesin Supra X 125 Tahun 2008. Jurnal Teknik Mesin Vol 3 No 1 Tahun 2014. Universitas Negeri Surabaya.

Ngurah sanjaya, dkk. 2019. Analisis Perbandingan Durasi Camshaft Terhadap Torsi Dan Daya Pada Motor Bensin 4 Langkah. Jurnal Pendidikan Teknik Mesin Undiksha. JJTM Vol 7 No 1 Tahun 2019. Universitas Pendidikan Ganesha.

Priyo Andrianto. 2014. Pengaruh Penggunaan Camshaft Standar Dan Camshaft Racing Terhadap Unjuk Kerja Motor Bensin Empat Langkah. Universitas Muhammadiyah Surakarta. Surakarta: Teknik Mesin.

Sunyoto, dkk. 2008. Teknik Mesin Industri. Jakarta: Departemen Pendidikan Nasional.

Wahyu Hidayat, dkk. 2017. Teknologi Baru Motor Bensin Dan Standar Euro. Bandung: Alfabeta.

Willard W Pulkrabek. 2004. Engineering Fundamentals Of The Internal Combustion Engine. University of Wisconsin.

Daryanto. 2004. Teknik Sepeda Motor. Bandung: Yrama Widya.

Santosh Patil, et al, 2013. Modal And Fatique Analysis Of A Camshaft Using FEA. International Journal Of Applied Engineering Research. ISSN 0973-4562 Volume 8, Number 14 (2013). 1685-1694.

Yuliastuti, dkk. 2008. Estimasi Sebaran Keruangan Emisi Gas Buang Kendaraan Bermotor Di Kota Semarang. Skripsi. Jurusan Perencanaan Wilayah Dan Kota. Universitas Diponegoro. Semarang




DOI: http://dx.doi.org/10.17977/um054v3i2p74-83

Refbacks

  • There are currently no refbacks.


Alamat Editorial:
Pendidikan Teknik Mesin, Fakultas Teknik
Universitas Negeri Malang
Jl. Semarang No.5 Kota Malang 65145,
Phone. (0341) 551312 psw 298,
email: jtmp@um.ac.id
Website: http://journal2.um.ac.id/index.php/jtmp/index

E-ISSN 2623-1271

Creative Commons License

This work is licensed under a CC BY SA 4.0.