INTEGRASI METODE FUZZY ANALYTICAL HIERARCHY PROCESS (FAHP) DALAM PEMILIHAN KEBIJAKAN RISK BASED MAINTENANCE PADA MESIN DH2100
Abstract
This study discusses the integration of Fuzzy Analytical Hierarchy Process (FAHP) method in the selection of Risk Based Maintenance (RBM) policy for DH2100 Machine at PT Fajar Putra Plasindo. The objective of this research is to enhance the effectiveness of maintenance strategies and optimize decision-making in RBM policy selection. The FAHP method is employed to address the uncertainties and complexities in maintenance decision-making. The results showed that a risk value of Rp. 83,365,100 was obtained or with a risk percentage of 0.1%. the percentage of the risk exceeds the established tolerance limit. So then the selection of maintenance actions is carried out using the FAHP, from the calculation results it is found that Condition Based Maintenance maintenance actions are the right maintenance actions for the DH2100 Machine.
References
T. P. Carvalho, F. A. A. M. N. Soares, R. Vita, R. da P. Francisco, J. P. Basto, and S. G. S. Alcalá, “A systematic literature review of machine learning methods applied to predictive maintenance,” Comput Ind Eng, vol. 137, 2019, doi: 10.1016/j.cie.2019.106024.
M. Nasution, A. Bakhori, and W. Novarika, “Manfaat Perlunya Manajemen Perawatan Untuk Bengkel Maupun Industri,” Buletin Utama Teknik, vol. 16, No. 3, 2021.
A. S. Wulandari and Erdi, “PENGARUH PEMELIHARAAN MESIN DAN TATA LETAK TERHADAP KELANCARAN PROSES PRODUKSI KOMPONEN ELEKTRIK PT. SHINHEUNG INDONESIA,” in SEMANIS: Seminar Manajemen Bisnis, 2023, pp. 5–8.
I. F. H. Lewohokol, Subianto, and M. Askiyanto, “Analisis Peningkatan Mutu Pemeliharaan Mesin Dan Bahan Baku Terhadap Kelancaran Proses Produksi Di UMKM Tohu Srijaya Kota Batu,” Universitas Tribhuwana Tunggadewi, Malang, 2020. Accessed: Jun. 02, 2022. [Online]. Available: http://rinjani.unitri.ac.id/handle/071061/403
F. Amir, J. Alhilman, and A. Pamoso, “Estimasi Risiko Kegagalan Dan Usulan Kebijakan Paper Pada Mesin Huron Di PT. XYZ Menggunakan Metode Risk Based Maintenance (RBM),” in eProceedings of Engineering, 2021.
V. R. P. Lubis, “ANALISIS KEKRITISAN ASET UNIT PRODUKSI ALF3 UNTUK PERBAIKAN KEBIJAKAN PEMELIHARAAN DAN MEMINIMASI RISIKO KEGAGALAN MENGGUNAKAN RISK BASED MAINTENANCE (Studi kasus di PT. Petrokimia Gresik, Jawa Timur),” Doctoral Dissertation, Universitas Pembangunan Nasional Veteran Yogyakarta, Yogyakarta, 2022.
F. Ramdan and G. H. N. N. Rahayu, “Analisis Risiko Kerusakan Material Pipa Penyangga Jembatan Jalur Pengeboran Minyak dengan Metode Risk Based Maintenance,” Jurnal INTECH Teknik Industri Universitas Serang Raya, vol. 9, no. 1, pp. 86–94, Jun. 2023, doi: 10.30656/intech.v9i1.6098.
A. Maharani, I. Wahyuli, S. Supriyadi, A. Nalhadi, and F. Fathurohman, “Analisa Biaya Perawatan Sistem Pneumatic dengan Menggunakan Metode Risk Based Maintenance dan Cost of Unreliability,” Jurnal Inovasi dan Kreativitas (JIKa), vol. 2, no. 1, 2022, doi: 10.30656/jika.v2i1.4722.
R. A. J. Putra, “SISTEM PENDUKUNG KEPUTUSAN PENGUKURAN PERFORMANSI KEGIATAN BELAJAR MAHASISWA SEMASA PANDEMI COVID-19,” Universitas Islam Negeri Sultan Syarif Kasim Riau, 2021.
D. Anggoro and N. Nawindah, “PERBANDINGAN FUZZY AHP-SAW DENGAN FUZZY AHP-VIKOR UNTUK MENINGKATKAN DAYA SERAP POLITEKNIK TERHADAP INDUSTRI,” Jurnal Ilmiah Teknologi Infomasi Terapan, vol. 6, no. 1, 2019, doi: 10.33197/jitter.vol6.iss1.2019.204.
S. A. Ali and A. Ahmad, “Suitability analysis for municipal landfill site selection using fuzzy analytic hierarchy process and geospatial technique,” Environ Earth Sci, vol. 79, no. 10, 2020, doi: 10.1007/s12665-020-08970-z.
K. Jilcha Sileyew, “Research Design and Methodology,” in Cyberspace, 2020. doi: 10.5772/intechopen.85731.
J. C. Lopez and A. Kolios, “Risk-based maintenance strategy selection for wind turbine composite blades,” Energy Reports, vol. 8, 2022, doi: 10.1016/j.egyr.2022.04.027.
A. J. Kolios and U. Smolka, “Risk-based maintenance strategies for offshore wind energy assets,” in Proceedings - Annual Reliability and Maintainability Symposium, 2020. doi: 10.1109/RAMS48030.2020.9153642.
DOI: http://dx.doi.org/10.17977/um054v6i1p37-46
Refbacks
- There are currently no refbacks.
Copyright (c) 2023 Rahmad Wisnu Wardana, Bagus Mahendra Efendi, Ilyas Masudin
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Alamat Editorial:
Pendidikan Teknik Mesin, Fakultas Teknik
Universitas Negeri Malang
Jl. Semarang No.5 Kota Malang 65145,
Phone. (0341) 551312 psw 298,
email: jtmp@um.ac.id
Website: http://journal2.um.ac.id/index.php/jtmp/index
E-ISSN 2623-1271
This work is licensed under a CC BY SA 4.0.
View My Stats