ANALISIS KOMPARATIF SIFAT HIDROFILIK KAMPAS REM BERPENGUAT ARANG KELAPA DAN KULIT PISANG
Abstract
Keywords
Full Text:
PDFReferences
Agviolita, P., Yushardi, Y. and Anggraeni, F.K.A. (2021) “Pengaruh Perbedaan Biochar terhadap Kemampuan Menjaga Retensi pada Tanah,” Jurnal Fisika Unand, 10(2), pp. 267–273. Available at: https://doi.org/10.25077/jfu.10.2.267-273.2021.
Ahsan, M. et al. (2024) “Exploring pectin from ripe and unripe Banana Peel: A novel functional fat replacers in muffins,” Food Chemistry: X, 23. Available at: https://doi.org/10.1016/j.fochx.2024.101539.
Alfarizi, E.H. et al. (2025) “Studi Karakteristik Briket Arang Sabut Kelapa dengan Variasi Komposisi Menggunakan Mesin Screw Extruder,” Jurnal Rekayasa Mesin, [Volume not specified]([Issue not specified]), p. [Page numbers not specified]. Available at: https://ejournal.unesa.ac.id/index.php/jurnal-rekayasa-mesin/article/view/67067.
Dewi, M.S., Susatyo, E.B. and Susilaningsih, E. (2015) “Pemanfaatan Arang Aktif Kulit Pisang Raja Untuk Menurunkan Kadar Ion Pb(II),” Indonesian Journal of Chemical Science, 4(3). Available at: https://lib.unnes.ac.id/51553/.
Dirisu, J.O. et al. (2024) “Development of eco-friendly brake pads using industrial and agro-waste materials,” Journal of Engineering and Applied Science, 71(1), p. 55. Available at: https://doi.org/10.1186/s44147-023-00345-y.
Gomes, F.S. et al. (2023) “Influence of coconut fiber on the microstructural, mechanical and hydraulic behavior of unsaturated compacted soil,” Soils and Rocks, 46(2). Available at: https://doi.org/10.28927/SR.2023.013322.
Jústiz-Smith, N.G., Virgo, G.J. and Buchanan, V.E. (2008) “Potential of Jamaican banana, coconut coir and bagasse fibres as composite materials,” Materials Characterization, 59(9), pp. 1273–1278. Available at: https://doi.org/10.1016/j.matchar.2007.10.011.
Kussuma H S, M.F. and Sutikno (2019) “Testing of mechanical characteristics of coconut fiber reinforced for composite brake pads for two-wheeled vehicles,” IOP Conference Series: Materials Science and Engineering, 546(4), p. 42018. Available at: https://doi.org/10.1088/1757-899X/546/4/042018.
Muliati, L., Lubis, L.H. and Nasution, N. (2022) “Pengaruh Penambahan Variasi Perekat Kanji dan Lem Kayu terhadap Kualitas Pot Sabut Kelapa sebagai Media Tanam Ramah Lingkungan,” Jurnal Phi: Jurnal Pendidikan Fisika dan Fisika Terapan, 8(1), pp. 57–62. Available at: https://www.jurnal.ar-raniry.ac.id/index.php/jurnalphi/article/view/15166.
Nandiyanto, A.B.D. et al. (2022) “Effect of palm fronds and rice husk composition ratio on the mechanical properties of composite-based brake pad,” Moroccan Journal of Chemistry, 10(4), pp. 663–677. Available at: https://doi.org/10.48317/IMIST.PRSM/morjchem-v10i4.34291.
Nawangsari, P. et al. (2023) “Optimasi Parameter Pembuatan Sampel Kampas Rem Non-asbestos Organic (NAO) terhadap Kekerasan dan Porositas Menggunakan Metode Taguchi,” Jurnal Rekayasa Mesin, 18(2), pp. 183–192. Available at: https://doi.org/10.32497/jrm.v18i2.4112.
Rogers, R.A. and al., et (2021) “Final results from a 90-day quantitative inhalation toxicology study evaluating the dose-response and fate in the lung and pleura of chrysotile-containing brake dust compared to TiO2, chrysotile, crocidolite or amosite asbestos,” Toxicology and Applied Pharmacology, 424. Available at: https://doi.org/10.1016/j.taap.2021.115598.
Schramm, D. et al. (2021) “Test Procedure Development and Validation for Brake Wet Fading in the FKFS Thermal Wind Tunnel,” Proceedings [Preprint]. Available at: https://fid-move.tib.eu/en/search/id/springer:eada14909d7423a4b352f021876864788bcd2256.
Singh, T. (2020) “Utilization of cement bypass dust in the development of sustainable automotive brake friction composite materials,” Arabian Journal of Chemistry, 14(1). Available at: https://doi.org/10.1016/j.arabjc.2020.11.020.
Suryawan, L.A., Sena, B. and Rahmanto, A.A. (2025) “Identifikasi Root Cause Produk Ng Master Cylinder,” Jurnal Teknik Mesin, 18(1), pp. 105–110. Available at: https://ejournal2.pnp.ac.id/index.php/jtm/article/view/1773.
Tarsono, Y.P. and Rahmalina, D. (2021) “Pengaruh Karbon Aktif Dan Serbuk Tempurung Kelapa Matrik Aluminum Terhadap Kekerasan Brake Pad Komposit,” Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin, 11(2). Available at: https://teknik.univpancasila.ac.id/dosen/similarity/Dwi Rahmalina/4_%5BTurnitin%5D Pengaruh Karbon Aktif Dan Serbuk.
DOI: http://dx.doi.org/10.17977/um074v10i22026p179-187
Refbacks
- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Jurnal Teknik Otomotif: Kajian Keilmuan & Pengajaran
ISSN: 0613-9324 | E-ISSN: 2613-9316
Contact
Diterbitkan oleh Program Studi Pendidikan Teknik Otomotif, Jurusan Teknik Mesin, Fakultas Teknik, Universitas Negeri Malang (UM)
Jl. Semarang No 5 Malang 65145
Homepage: http://journal2.um.ac.id/index.php/jto/index
Telepon: 0341-565307

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
1.png)
1.png)
4.png)
1.png)
2.png)
.png)
3.png)
1.png)
1.png)

