PENERAPAN FULL PLATE ARMOR SEBAGAI TEKNOLOGI PANEN SALAK RAMAH LINGKUNGAN DI DESA SUKODONO, DAMPIT, MALANG

Erwin Komara Mindarta, Didin Zakariya Lubis, Dani Irawan, Nur Ali Ridho, Rahmatullah Rahmatullah

Abstract


Abstrak: Proses pemanenan buah salak harus dikerjakan secara teliti untuk memilih buah mana yang layak panen. Untuk buah salak yang telah matang, biasanya dapat dipetik hanya menggunakan tangan. Namun, jika buah salak yang hendak dipanen berada di tengah-tengah pohonnya dan tertutup oleh duri-duri, maka proses panen salak menjadi sulit. Tim pelaksana pengabdian kepada masyarakat dari Jurusan Teknik Mesin Universitas Negeri Malang (UM) menjawab kebutuhan mitra, dengan memberikan solusi Inovasi TTG Full Plate Armor. Untuk mencapai tujuan pengabdian, prosedur yang ditempuh meliputi 1) survey lokasi, 2) pendekatan sosial, 3) pengembangan produk, 4) penyusunan panduan, 5) penerapan ipteks/TTG melalui kegiatan sosialisasi, introduksi alat/TTG dan pelatihan; 6) tindak lanjut melalui percontohan dan pendampingan; 7) monev: presentasi kemajuan dan laporan akhir, dan 8) memenuhi kewajiban luaran. Hasil PKM: 1) produk berfungsi dengan baik serta bermanfaat bagi pemakainya: a) melindungi tubuh dari duri pohon salak, b) memotong buah salak yang terjepit dengan mudah, c) dapat memangkas bagian pohon salak yang sudah tidak ada gunanya; dan 2) meningkatkan efisiensi proses panen salak dari 15 pohon menjadi 20, 23, 25 pohon dalam sehari.

 

Abstract: The process of harvesting salak fruit must be done carefully to choose which fruit is suitable for harvesting. For ripe salak fruit, it can usually be picked only by hand. However, if the salak fruit to be harvested is in the middle of the tree and covered with thorns, then the salak harvesting process becomes difficult. The community service implementation team from the Department of Mechanical Engineering, State University of Malang (UM) answered the needs of partners, by providing TTG Full Plate Armor Innovation solutions. To achieve the goal of service, the procedures taken include 1) site survey, 2) social approach, 3) product development, 4) preparation of guidelines, 5) application of science and technology/TTG through socialization activities, introduction of tools/TTG and training; 6) follow-up through pilots and mentoring; 7) monev: presentation of progress and final reports, and 8) fulfill external obligations. The results of PKM: 1) the product functions properly and is beneficial for the wearer: a) protects the body from the thorns of the salak tree, b) cuts the pinched salak fruit easily, c) can trim the part of the salak tree that is no longer useful; and 2) increasing the efficiency of the salak harvesting process from 15 trees to 20, 23, 25 trees in a day.

 


Keywords


duri, full plate armor, salak

Full Text:

PDF

References


E I A Administration, U. s. E. I. (2018). Biomass-Explained. Independent Statstics and Analysis, 2. https://www.eia.gov/energyexplained/biomass/

GUAN, M., ZHANG, X., WU, Y., SUN, Q., DONG, D., ZHANG, X., & WANG, J. (2020). Biomass Straw Based Activated Porous Carbon Materials for High-Performance Supercapacitors. Research and Application of Materials Science, 1(2). https://doi.org/10.33142/msra.v1i2.1665

Hande, A S, & Padole, V. (2015). Design & fabrication of portable organic waste chopping machine to obtain compost. … Journal for Innovative Research in Science & …, 2(03).

Hande, Ajinkya S. (2014). Methodology For Design & Fabrication of Portable Organic Waste Chopping Machine To Obtain Compost-A Review. IJIRST-International Journal for Innovative Research in Science & Technology|, 1(7), 132–135. www.ijirst.org

Hendaryanto, I. A. (2018). Pembuatan Mesin Pencacah Sampah Organik Untuk Swadaya Pupuk di Desa Tancep Kecamatan Ngawen Kabupaten Gunungkidul. Jurnal Pengabdian Dan Pengembangan Masyarakat, 1(1). https://doi.org/10.22146/jp2m.40998

Hengsdijk, H., & de Boer, W. J. (2017). Post-harvest management and post-harvest losses of cereals in Ethiopia. Food Security, 9(5). https://doi.org/10.1007/s12571-017-0714-y

Kasso, M., & Bekele, A. (2018). Post-harvest loss and quality deterioration of horticultural crops in Dire Dawa Region, Ethiopia. Journal of the Saudi Society of Agricultural Sciences, 17(1). https://doi.org/10.1016/j.jssas.2016.01.005

Kung, C. C., & Zhang, N. (2015). Renewable energy from pyrolysis using crops and agricultural residuals: An economic and environmental evaluation. Energy, 90. https://doi.org/10.1016/j.energy.2015.06.114

Li, T., Fang, F., Yang, Y., Shen, W., Bao, W., Zhang, T., Ai, F., Ding, X., Xin, H., & Wang, X. (2019). Surface nano-engineered wheat straw for portable and adjustable water purification. Science of the Total Environment, 655, 1028–1036. https://doi.org/10.1016/j.scitotenv.2018.11.206

Mindarta, E. K., Wibowo, A. A., & Putra, A. B. N. R. (2018). Designing portable chopping plastic waste machine utilizing electric motor. MATEC Web of Conferences, 204. https://doi.org/10.1051/matecconf/201820404005

Putra, R. (n.d.). Analisis Peningkatan Produksi Padi Dengan Sistem Pengolahan Tanah Dengan Menggunakan Protein Dnt Di Desa Blang Punteut Kecamatan Blang Mangat Kota Lhokseumawe. 215–221.

Rana, R. A., Siddiqui, M. N., Skalicky, M., Brestic, M., Hossain, A., Kayesh, E., Popov, M., Hejnak, V., Gupta, D. R., Mahmud, N. U., & Islam, T. (2021). Prospects of nanotechnology in improving the productivity and quality of horticultural crops. In Horticulturae (Vol. 7, Issue 10). MDPI. https://doi.org/10.3390/horticulturae7100332

Strategies to Reduce Post-Harvest Losses for Fruits and Vegetables. (2019). International Journal of Scientific and Technological Research. https://doi.org/10.7176/jstr/5-3-04

Sunaryo, Bahrun, A., Magribi, & Sukotjo, E. (2019). Productivity Analysis and Efficiency of Transportation Clay Raw Materials in Small Brick Industries using Grandong Based on Appropriate Technology. International Journal of Scientific & Engineering Research, 10(8), 550–559. https://www.researchgate.net/publication/341281944_Productivity_Analysis_and_Efficiency_of_Transportation_Clay_Raw_Materials_in_Small_Brick_Industries_using_Grandong_Based_on_Appropriate_Technology

Sunaryo, & Sufrianto. (2020). Break-even analysis of Clay Transport as Raw Materials in Small Bricks Industry using Grandong based Appropriate Technology in Rural Areas. International Journal of Scientific & Engineering Research, 11. https://doi.org/10.17605/OSF.IO/KPQ5B

Syofiani, R., & Putri, S. D. (2019). Pengembangan Potensi Gulma Kirinyuh Dan Limbah Pertanian Sebagai Pupuk Organik Alternatif Di Nagari Palaluar Kecamatan Koto Vii Kabupaten Sijunjung Sumatera Barat. Jurnal Agrium, 16(1). https://doi.org/10.29103/agrium.v16i1.1338




DOI: http://dx.doi.org/10.17977/um078v4i42022p340-349

Refbacks

  • There are currently no refbacks.


Email: jgp@um.ac.id

View JGP's Stats

Creative Commons License
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

Index by: