Analyzing the Performance of a Solar-Assisted Grain Dryer

Daniel Parenden, Frederik H. Sumbung, Peter Sahupala

Abstract


This study evaluates the drying performance and energy efficiency of a solar-powered rice cabinet dryer equipped with two distinct airflow mechanisms: free convection (chimney-assisted) and forced convection (fan-assisted). Field experiments were conducted under tropical conditions in This study evaluates the drying performance and energy efficiency of a solar-powered rice cabinet dryer equipped with two distinct airflow mechanisms: free convection (chimney-assisted) and forced convection (fan-assisted). Field experiments were conducted under tropical conditions in Merauke, Indonesia, comparing drying efficiency, moisture reduction, and air mass flow across three rice grain loads: 1 kg, 3 kg, and 5 kg. The experimental design incorporated both thermal analysis and statistical evaluation (ANOVA and t-tests) to assess the effects of airflow method and grain weight on drying outcomes. Results indicate that the chimney system demonstrated more stable and efficient performance at lower grain weights (1–3 kg), with range efficiency of 32.07% - 37.5% compared to 28.26% - 32.67% using the fan-assisted method. Drying efficiency increases with grain load, reaching a maximum of 43.75% for chimney-assisted drying and 43.44% for fan-assisted drying at 5 kg. However, the fan-assisted system provided superior performance at higher loads due to improved heat and moisture transfer. Although the fan method yielded faster drying rates and more effective moisture reduction, it exhibited slightly greater variability. Despite limitations related to experimental scale and real-time solar radiation monitoring, the findings confirm that solar-powered cabinet dryers—especially those with adaptive airflow control—offer a cost-effective, energy-efficient, and scalable drying solution for smallholder rice producers. Future work should prioritize scaling up capacity, integrating hybrid energy sources, and automating temperature regulation to enhance system performance under fluctuating weather conditions

Keywords


Chimney, collector, drying, fan, grain, moisture content.

Full Text:

PDF

References


S. Andriani, "Merauke agriculture service targets 2025 planting season area of 71,146 Ha, production predicted at 370 thousand tons", Public Info News Portal, November 8, 2024. Accessed January 14, 2025. Available: https://infopublik.id/kategori/nusantara/884251/dinas-pertanian-merauke.

Trio, "Evaluating agricultural performance and results, working meeting held in Merauke", Merauke Regency Regional Government, April 29, 2019. Accessed January 14, 2025. Available: https://portal.merauke.go.id/news/3967/mengevaluasi-kinerja-dan-hasil-pertanian-digelar-rapat-kerja-di-merauke.html. Merauke.

A. Sharma, C.R. Chen, and V.L. Nguyen, “Solar-energy drying systems: A review”, Renewable and Sustainable Energy Reviews, vol. 13, no. 6–7, pp. 1185-1210, August–September 2009., doi: https://doi.org/10.1016/j.rser.2008.08.015.

P. Sahupala, and R.D. Latuheru, "Design of grain dryer using pressure flow forced convection method of hot air", European Journal of Engineering and Technology Research, vol. 7, no. 6, pp. 108–112, 2022, doi: 10.24018/ejeng.2022.7.6.2935.

D. Puspitasari, P. Puspitasari, M. Mustapha, and T. Ginta, "Effect of heating temperature, holding time, and stabilization temperature on al-foam properties", Journal of Mechanical Engineering Science and Technology (JMEST), vol. 7, no. 2, pp. 147-156, 2023, doi:http://dx.doi.org/10.17977/um016v7i22023p147.

P. Sahupala, D. Perenden, and C.W. Wullur, "The design of grain drying oven using residual exhaust gas from diesel engine with heat transfer analysis", E3S Web of Conferences, vol. 73, 05028, 2018, doi: 10.1051/e3sconf/20187305028.

T. Trismawati, H. Nanlohy, H. Riupassa, and S. Marianingsih, "Computational fluid dynamics analysis of temperature distribution on solar distillation panels with various flat plate materials", Journal of Mechanical Engineering Science and Technology (JMEST), vol. 8, no. 1, pp. 108-122, 2024, doi: 10.17977/um0168i12024p108.

L. Alfaris, R. Siagian, A. Muhammad, and B. Nasution, "Heat conduction in cylindrical coordinates with time-varying conduction coefficient: a practical engineering approach", Journal of Mechanical Engineering Science and Technology (JMEST), vol. 7, no. 2, pp. 157-169, 2023, doi: 10.17977/um016v7i22023p157.

R. Setiawan, P. Darmanto, V. Fahriani, and S. Pertiwi, "Optimization of shell and tube thermal design of liquid to liquid heat exchanger to minimize cost using bell-delaware combination method and genetic algorithm", Journal of Mechanical Engineering Science and Technology (JMEST), vol. 4, no. 1, pp. 14-27, 2020, doi: 10.17977/um016v4i12020p014

R.D. Saputro, B.A. Girawan, J.S. Pribadi, F. Fadillah, and M. Mardiyana, "Design of frames and heating pipes in rice drying machines", Sustainable Research In Management of Agroindustry, vol. 1, no. 1, pp. 28–32, 2021, doi: 10.35970/surimi.v1i1.573.

P. Sahupala, and R.D. Latuheru, "Analysis of grain drying using the pressure the flow of air heat forced convection method", International Journal of Heat and Technology, vol. 43, no. 1, pp. 370-380, February 2025, doi: 10.18280/ijht.430138

S. Doddy and K. Tikupadang, "Efficiency of air heating collector from several absorber plate materials in a grains dryer", Techno Entrepreneur Acta Scientific Journal, vol. 3, no. 2, pp. 97-101, October 2018.

D. Suwandi, A. Sifa, T. Endramawan, and K. Sumeru, "Performance of rice grain conveyor vacuum blower with variations in the number and shape of impeller angles", Journal of Mechanical Engineering Science and Technology (JMEST), vol. 9, no. 1, pp. 154-164, 2025, doi: 10.17977/um016v9i12025p154.

M. Rusdi, H. Hariyanto, and C.A. Wahyudi, "Increasing agricultural productivity using smart energy pump technology in the Wasur Rimba Jaya Merauke Papua Farmers Group", Indonesian Community Service Journal, vol. 3, no. 3, pp. 815–822, 2023, doi: 10.54082/jamsi.750.

N. Kalita, S.D. Tavhare, P. Muthukumar, and A. Dalal, "Comparative analysis of biogas hybrid solar dryer and open sun drying: Phytochemical properties in medicinal herbs", Thermal Science and Engineering Progress, vol. 62, 103574, June 2025, doi: 10.1016/j.tsep.2025.103574.

T. Panggabean, A. Neni, and A. Hayati, “Performance of grain drying using rack-type dryer with solar energy, biomass, and combination,” Agritech, vol. 37, no. 2, pp. 229-235, 2017, doi: 10.22146/agritech.25989.

R.J. Suardi, Ikwani, and A.P.R. Aulia, "Effect of temperature variations of corn (maize) oil biodiesel on torque values and thermal efficiency of diesel engines", Journal of Mechanical Engineering Science and Technology (JMEST), vol. 7, no. 1, pp. 87-95, 2023, doi:10.17977/um016v7i12023p087.

R. Setiawan, S.M. Fajar, and V.P. Fahriani, “Manufacturing and testing of double pipe type heat exchanger practical device”, Barometer-Journal of Engineering Science and Applications, vol. 5, no. 1, pp. 227–231, 2020, doi: 10.35261/barometer.v5i1.3815

S. Amin, Jamaluddin, and M. Rais, "Rate of heat transfer and mass on drying process of grain using batch dryer type", Journal of Agricultural Technology Education, vol. 5, no. 1, pp. 227–231, 2020, doi: 10.35261/barometer.v5i1.3815.

I.B. Alit, I.G.B. Susana, and I.M. Mara, "Thermal characteristics of the dryer with rice husk double furnace - heat exchanger for smallholder scale drying", Case Studies Thermal Engineering, vol. 28, no. 101565, 2021, doi: 10.1016/j.csite.2021.101565.

A. Sitorus, Novrinaldi, S.A. Putra, I.S. Cebro, and R. Bulan, "Modelling drying kinetics of grain in swirling fluidized bed dryer", Case Studies Thermal Engineering, vol. 28, no. 101572, 2021, doi: 10.1016/j.csite.2021.101572.

A. Brillian, Purwanto, and Rahmadwati, "Temperature control in grain drying process using rotary dryer tool based on Arduino Uno microcontroller", TEUB Electrical Engineering Student Journal, vol. 3, no. 7, 2015.

S.R.M. Nainggolan, Tamrin, Warji, and L. Budianto, "Performance test of lab scale batch for rough rice drying using husk of rice fuel", Lampung Agricultural Engineering Journal, vol. 2, no. 3, pp. 161-172, 2019.

P. Tamaria, N. T. Arjuna, and H. Ari, "Drying performance for grain using tray dryer with solar, biomass, and combination energy", Agritech, vol. 37, no. 2, pp. 229-235, 2017, doi: 10.22146/agritech.25989.




DOI: http://dx.doi.org/10.17977/um016v9i12025p215

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Journal of Mechanical Engineering Science and Technology (JMEST)

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

View My Stats