Email this article 
.png)
.png)
1.png)
Designing a laboratory assistant attendance system using Radio Frequency Identification (RFID) technology based on IOT
Abstract
Abstrak: Tujuan penelitian ini untuk menghasilkan perangkat presensi RFID (Radio Frequency Identification) sebagai sistem presensi asisten lab di Lab Information and Communication of Technology (ICT) Terpadu Budi Luhur untuk mengatasi permasalahan yang sedang terjadi seperti antrean, kerumitan saat menginput, dan manipulasi waktu kehadiran sampai kepulangan. Pengembangan sistem ini menggunakan metode agile yang bisa menangani risiko ketidakberhasilan dalam tahap pengembangan sistem skala kecil maupun besar. Tahapan merancang sistem memanfaatkan Unified Modeling Language (UML). Pengumpulan data dilakukan dengan teknik observasi, wawancara, dan kuesioner terhadap lingkungan LAB ICT Terpadu Budi Luhur. Hasil penilaian ahli kelayakan pengujian mencapai persentase 90 (sangat pantas), pengujian praktis mencapai persentase 92 (sangat pantas), uji keamanan mencapai persentase 90 (layak), dan uji coba kelompok besar mencapai persentase 90 (sangat pantas). Dapat disimpulkan perancangan sistem dengan menggunakan UML dengan teknologi RFID dapat meningkatkan efektivitas presensi serta menyelesaikan permasalahan dalam presensi.
Abstract: The current study attempted to generate an RFID (Radio Frequency Identification) attendance device as a bridge of attendance for the Computer Lab Assistant of Budi Luhur to overcome ongoing problems such as queues, complexity when inputting, and manipulation of attendance time to return. The development of this system uses agile methods that can handle the risk of failure in the small and large-scale system development stages. The system design stage uses UML. The data was collected using observation, interviews, and questionnaires in the Budi Luhur Integrated ICT LAB environment. The outcomes of the viability examination expert assessment attained a rate of 90 percent (highly achievable), the practicality test achieved a level of 92 (highly achievable), the security test attained a level of 90 (practicable), the large-group trial achieved a level of 90 (highly achievable). It can be concluded that designing a system using UML with RFID technology can increase the effectiveness of attendance and solve problems in it.
Keywords
Full Text:
PDFReferences
Al Ghivary, R., Wulandari, N., Srikandi, N., & Nazilatul F, A. M. (2023). Peran Visualisasi Data Untuk Menunjang Analisa Data Kependudukan Di Indonesia. Jurnal Administrasi Publik 1(1). https://doi.org/10.24853/penta.1.1.57-62
Aprilliani, M. (2023) Pengertian presensi, fungsi, struktur, dan 7 jenisnya. Glits For Employes. Available at: https://employers.glints.com/id-id/blog/presensi-adalah/ (Accessed: 5 January 2024).
Bakar, S. A., & Dorasamy, M. (2023). From adoption to sustainability: a journey of large-scale agile implementation. International Journal of Technology, 14(6), 1367–1379. https://doi.org/10.14716/ijtech.v14i6.6645
Bharathy, M. G. T., Bhavanisankari, M. S., & Tamilselvi, T. (2021). Smart attendance monitoring system using iot and rfid. International Journal of Advances in Engineering and Management (IJAEM), 3, 1307. https://doi.org/10.35629/5252-030613071313
Costa, F., Genovesi, S., Borgese, M., Michel, A., Dicandia, F. A., & Manara, G. (2021). A review of rfid sensors, the new frontier of internet of things. In Sensors 21(9). MDPI AG. https://doi.org/10.3390/s21093138
Dewi, S. K., Sudaryanto, A., Studi Keperawatan, P., Muhammadiyah Surakarta, U., & Komunitas, K. (2020.). Validitas dan Reliabilitas Kuisioner Pengetahuan, Sikap dan Perilaku Pencegahan Demam Berdarah. Seminar Nasional Keperawatan Universitas Muhammadiyah Surakarta (SEMNASKEP).
Hansen, S. (2020). Investigasi teknik wawancara dalam penelitian kualitatif manajemen konstruksi. Jurnal Teknik Sipil, 27(3), 283. https://doi.org/10.5614/jts.2020.27.3.10
Işık, G., & Çifci, M. C. (2023). A model proposal for scaling the productivity increase in agile project management methodology. International Journal of Pioneering Technology and Engineering, 2(02), 147–164. https://doi.org/10.56158/jpte.2023.48.2.02
Karampure, R., Wang, C. Y., & Vashi, Y. (2021). UML sequence diagram to Axiomatic Design Matrix Conversion: A method for concept improvement for software in Integrated Systems. Procedia CIRP, 100, 457–462. https://doi.org/10.1016/j.procir.2021.05.104
Kurnia, A., Imanuel Salangka, S., & Prasetyo Utomo, U. (2023). Rancang bangun sistem booking foto studio berbasis web menggunakan metode agile. In BIIKMA : Buletin Ilmiah Ilmu Komputer dan Multimedia 1(1). https://jurnalmahasiswa.com/index.php/biikma
Lee, W. T., & Chen, C. H. (2023). Agile software development and reuse approach with scrum and software product line engineering. Electronics (Switzerland), 12(15). https://doi.org/10.3390/electronics12153291
Meyliana, A. (2020). Perancangan sistem informasi presensi karyawan dengan metode prototype menggunakan fingerprint. In Journal Speed-Sentra Penelitian Engineering dan Edukasim, 12(2), 73–79.
Prastowo, W. D., Danianti, D., & Pramuntadi, A. (2023). Analisis risiko pada pengembangan perangkat lunak menggunakan metode agile dan rad (rapid application development). Citizen : Jurnal Ilmiah Multidisiplin Indonesia, 3(3), 169–174. https://doi.org/10.53866/jimi.v3i3.388
Putra, I. G. S. E., Lee, A., Mahayana, I. M. T., & Dharmayasa, I. G. A. W. (2021). Design and development of lecturer attendance system using radio frequency identification (RFID). Int J Comput Sci Eng (IJCSE), 10(1), 15–27. https://doi.org/10.21817/ijcsenet/2021/v10i1/211001010
Raafi’udin, R., Hananto, B., & Nugrahaeni Puspita Dewi, C. (2020). Analisa trafik pengunjung website dalam pengembangan ui dan ux. Informatik : Jurnal Ilmu Komputer, 15(2), 61. https://doi.org/10.52958/iftk.v15i2.1419
Rolland, K. H., Fitzgerald, B., Dingsøyr, T., & Stol, K.-J. (2023). Acrobats and safety-nets: problematizing large-scale agile software development. ACM Transactions on Software Engineering and Methodology. https://doi.org/10.1145/3617169
Supriyono. (2020). Software testing with the approach of blackbox Testing on the academic information system. International Journal of Information System and Technology, 3(2), 228–233. https://doi.org/https://doi.org/10.30645/ijistech.v3i2.54
Tungadi, A. L., & Lisangan, E. A. (2020). Analisis kelayakan penerapan rfid pada fungsi bisnis penjualan sebagai komponen enterprise resource planning. JUSIFO, 6(1), 31–44. https://doi.org/10.19109/jusifo.v6i1.5714
Ula, M., Pratama, A., Asbar, Y., Fuadi, W., Fajri, R., & Hardi, R. (2021). A new model of the student attendance monitoring system using rfid technology. Journal of Physics: Conference Series, 1807(1). https://doi.org/10.1088/1742-6596/1807/1/012026
Wang, X., Ding, H., Luo, Z., Xu, X., Wei, Y., Li, Y., Wang, Q., & Jia, Q. (2023). The indoor positioning method time difference of arrival with conic curves utilizing a novel networking rfid system. Electronics (Switzerland), 12(15). https://doi.org/10.3390/electronics12153236
Wardana, A., Azzahra Batubara, A., Wanandi, B. S., Muzaddidah, C., Andrea, K., & Hafizh, M. A. (2023). Rancangan desain prototype rfid pada presensi mahasiswa menggunakan ktm di prodi sistem informasi uinsu. Jurnal Komputer Teknologi Informasi Sistem Komputer (JUKTISI), 1(3), 199–207.
Yuliono, G., Choirina, P., & Darajat, P. P. (2023). Sistem informasi presensi dan penggajian guru dengan radio frequency identification (RFID) menggunakan e-ktp studi kasus: SD Negeri 1 Permanu, kabupaten malang. Methomika Jurnal Manajemen Informatika dan Komputerisasi Akuntansi, 7(2), 347–354. https://doi.org/10.46880/jmika.Vol7No2.pp347-354
DOI: http://dx.doi.org/10.17977/um031v11i12024p044
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Maulana Krisna Bayu Pratama, Yulia Puspita Dewi, Tri Ika Jaya Kusumawati, Dwi Pebrianti
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
======================================================================
Jurnal Inovasi dan Teknologi Pembelajaran published by Universitas Negeri Malang in collaboration with the Asosiasi Program Studi Teknologi Pendidikan Indonesia (APS TPI) and Ikatan Profesi Teknologi Pendidikan Indonesia (IPTPI) with a MoU.
Publisher Address:
Educational Technology Laboratorium, Building D5, 1st Floor
Faculty of Education, Universitas Negeri Malang
Semarang St. No. 5, Malang City, East Java Province, Postal Code 65145
Email: jinotep.fip@um.ac.id
======================================================================
1.png)
.png)
1.png)
4.png)
2.png)
1.png)
1.png)
.png)
_3.png)
JINOTEP is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
JINOTEP Statistics (Since July 13th, 2020)